air
avionics
2. System Interconnects
2.4 Static Pressure Port
For some of its functions, AT-1 measures the barometric altitude. The unit features an
integrated pressure sensor. For more precise readings, this pressure sensor can be connected
to the aircraft’s static pressure port using an optional static pressure port connector.
Figure 2.6.: The static port pressure connector can be optionally installed.
The static port adapter fits most aviaition standard tubings an has an outer diameter of
6mm. The threading used to connect the adapter is M3 with a length of 3mm.
If the static port pressure connector is not installed, ensure that the static port of the
unit is not covered.
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
11
