4. Installation Overview
air
avionics
4.6 AT-1 Mounting Considerations
AT-1 is designed to be mounted in the avionics compartment or behind the instrument
panel of an aircraft. Depending on the aircraft’s individual requirements other locations
may be suitable as well.
Not all compatible cockpit systems are capable of displaying status messages from
AT-1. Some cockpit systems do not show any other messages than traffic data and
therefore the system state is not shown to the flight crew. If there is no system in
your installation that is capable of displaying status messages, please install AT-1 in a
position where the status LEDs can be monitored by the flight crew.
Be sure that no aircraft controls and emergency features interfere with AT-1.
Two mounting options are possible:
•
AT-1 can be mounted remotely in a mounting tray or mounting rack.
•
AT-1 can be directly attached to an
AIR Avionics
AIR Traffic Display (ATD-57 or ATD-80).
Figure 4.10.: AT-1 mounted in a tray.
28
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
