F. Configuration Parameters
air
avionics
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
50
F.4.5 Protection Volume 1 Warnings Threat Level
Description
Threat level (i.e. warning severity) of a target inside the protection volume 1. Be very
careful! Do not change this value unless you know exactly what you are doing. Adjusting
this parameter wrongly may suppress traffic warnings or inadequately lower threat levels.
•
Item Code:
PROTECTLEVEL1
•
Valid Values:
MIN_0, MAX_0, MIN_1, MAX_1, MIN_2, MAX_2, MIN_3, MAX_3
•
Default Value:
MIN_2
F.4.6 Protection Volume 2 Range [m]
Description
Adjusts the horizontal size of the ’protection volume 2’. Inside this volume, independent
from flight vectors, a certain threat level is set for any traffic target. Protection Volume 2 has
the second highest priority. It overrules all other protection volumes except protection
volume 1. Be very careful! Do not change this value unless you know exactly what you are
doing. Adjusting this parameter wrongly may suppress traffic warnings.
•
Item Code:
PROTECTRANGE2
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
0
F.4.7 Protection Volume 2 Vertical Range [m]
Description
Adjusts the vertical size of the ’protection volume 2’. Inside this volume, independent from
flight vectors, a certain threat level is set for any traffic target. Protection Volume 2 has the
second highest priority. It overrules all other protection volumes except protection volume
1. Be very careful! Do not change this value unless you know exactly what you are doing.
Adjusting this parameter wrongly may suppress traffic warnings.
•
Item Code:
PROTECTVRANGE2
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
0
F.4.8 Protection Volume 2 Warnings Threat Level
64
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
