air
avionics
F. Configuration Parameters
Description
Threat level (i.e. warning severity) of a target inside the protection volume 2. Be very
careful! Do not change this value unless you know exactly what you are doing. Adjusting
this parameter wrongly may suppress traffic warnings or inadequately lower threat levels.
•
Item Code:
PROTECTLEVEL2
•
Valid Values:
MIN_0, MAX_0, MIN_1, MAX_1, MIN_2, MAX_2, MIN_3, MAX_3
•
Default Value:
MIN_0
F.4.9 Protection Volume 3 Range [m]
Description
Adjusts the horizontal size of the ’protection volume 3’. Inside this volume, independent
from flight vectors, a certain threat level is set for any traffic target. Protection Volume 3 has
the second lowest priority. It only overrules protection volume 4. Be very careful! Do not
change this value unless you know exactly what you are doing. Adjusting this parameter
wrongly may suppress traffic warnings.
•
Item Code:
PROTECTRANGE3
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
0
F.4.10 Protection Volume 3 Vertical Range [m]
Description
Adjusts the vertical size of the ’protection volume 3’. Inside this volume, independent from
flight vectors, a certain threat level is set for any traffic target. Protection Volume 3 has
the second lowest priority. It only overrules protection volume 4. Be very careful! Do not
change this value unless you know exactly what you are doing. Adjusting this parameter
wrongly may suppress traffic warnings.
•
Item Code:
PROTECTVRANGE3
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
0
F.4.11 Protection Volume 3 Warnings Threat Level
Description
Threat level (i.e. warning severity) of a target inside the protection volume 3. Be very
careful! Do not change this value unless you know exactly what you are doing. Adjusting
this parameter wrongly may suppress traffic warnings or inadequately lower threat levels.
•
Item Code:
PROTECTLEVEL3
•
Valid Values:
MIN_0, MAX_0, MIN_1, MAX_1, MIN_2, MAX_2, MIN_3, MAX_3
•
Default Value:
MIN_0
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
65
