F. Configuration Parameters
air
avionics
Description
Activates the output of the $PAAVE dataset. PAAVE is an error dataset in the AAV data
protocol.
•
Item Code:
NMEAPAAVEW
•
Valid Values:
ON, OFF
•
Default Value:
OFF
F.9.20 WiFi Interface PFLAU ID
Description
Appends an identification data field to warning datasets in the FLARM data protocol.
•
Item Code:
NMEAPFLAUIDW
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.9.21 WiFi Interface PFLAU Non-Bearing Targets
Description
Selects how traffic warnings from non-bearing targets are transmitted over the data interface.
’Empty Bearing Field’ is recommended. Only set to ’Rotate Bearing’ if the connected traffic
display on this interface does not support datasets with empty bearing data fields.
•
Item Code:
NMEAPFLAUNONDIRW
•
Valid Values:
OFF, EMPTYBRG, ROTATE
•
Default Value:
OFF
F.9.22 WiFi Interface PFLAU Alert Zones
Description
Activates warnings from FLARM alert zones.
•
Item Code:
NMEAPFLAUZONESW
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.9.23 WiFi Interface PFLAU Advisory Alerts
Description
Activates FLARM Advisory Alerts. Advisory Alerts (also referred to as ’Info Alerts’) are short
traffic warning messages indicating that a target has been received for the first time within
the vicinity of the own aircraft.
•
Item Code:
NMEAPFLAUADVISORYW
76
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
