General Description
1
1.1 Introduction
This manual is intended to provide mechanical and electrical information for use in the
planning and design of an installation of the Air Traffic (AT-1) into an aircraft. This manual
is not a substitute for an approved airframe-specific maintenance manual, installation
design drawing, or complete installation data package. Attempting to install equipment by
reference to this manual alone and without planning or designing an installation specific to
your aircraft may compromise your safety and is not recommended. The content of this
manual assumes use by competent and qualified avionics engineering personnel and/or
avionics installation specialists using standard aviation maintenance practices in accordance
with relevant accepted practices. This manual is not intended for use by individuals who do
not possess the competencies and abilities set forth above. Refer to section ‘‘Limitations’’
for additional information and other considerations.
1.2 Equipment Description
Model
Part number
Description
AIR Traffic
AT-1
Traffic Warning System based on FLARM and ADS-B Technology
AT-1 is a small, lightweight traffic/electronic conspicuity system based on FLARM and ADS-B
technology. It detects the position of surrounding air traffic and transmits the own position
to other aircraft that are equipped with compatible systems. It transfers traffic data and
warning messages to compatible cockpit display systems, annunciators, and other avionics
systems using various data interfaces.
Figure 1.1.: AIR Traffic (AT-1) device.
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
1
