F. Configuration Parameters
air
avionics
•
Valid Values:
ON, OFF
•
Default Value:
OFF
F.10.20 RS-232 data port 1 PFLAU ID
Description
Appends an identification data field to warning datasets in the FLARM data protocol.
•
Item Code:
NMEAPFLAUID1
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.10.21 RS-232 data port 1 PFLAU Non-Bearing Targets
Description
Selects how traffic warnings from non-bearing targets are transmitted over the data interface.
’Empty Bearing Field’ is recommended. Only set to ’Rotate Bearing’ if the connected traffic
display on this interface does not support datasets with empty bearing data fields.
•
Item Code:
NMEAPFLAUNONDIR1
•
Valid Values:
OFF, EMPTYBRG, ROTATE
•
Default Value:
OFF
F.10.22 RS-232 data port 1 PFLAU Alert Zones
Description
Activates warnings from FLARM alert zones.
•
Item Code:
NMEAPFLAUZONES1
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.10.23 RS-232 data port 1 PFLAU Advisory Alerts
Description
Activates FLARM Advisory Alerts. Advisory Alerts (also referred to as ’Info Alerts’) are short
traffic warning messages indicating that a target has been received for the first time within
the vicinity of the own aircraft.
•
Item Code:
NMEAPFLAUADVISORY1
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.10.24 RS-232 data port 1 PFLAA Non-Bearing Targets
82
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
