F. Configuration Parameters
air
avionics
F.11 RS-232 data port 2
F.11.1 RS-232 data port 2 Flarm Traffic
Description
Activates or deactivates the output of Flarm traffic for this data interface.
•
Item Code:
FLARMTRAFFIC2
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.11.2 RS-232 data port 2 ADS-B Traffic
Description
Activates or deactivates the output of ADS-B traffic for this data interface.
•
Item Code:
ADSBTRAFFIC2
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.11.3 RS-232 data port 2 Range [m]
Description
Horizontal range limit. Targets outside of this range are not transmitted over this data
output.
•
Item Code:
RANGE2
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
25000
F.11.4 RS-232 data port 2 Vertical Range [m]
Description
Vertical range limit. Targets outside of this vertical range (differential altitude) are not
transmitted over this data output.
•
Item Code:
VRANGE2
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
1000
F.11.5 RS-232 data port 2 Non-Bearing Range [m]
Description
Horizontal range limit. Non-bearing targets outside of this range are not transmitted over
this data output.
84
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09