air
avionics
B. Configuration Menu Diagram
DEVICE
INSTALLATION
SIMULATOR
Eanbales a simula-
tor mode
SWITCHES
NORTH UP selec-
tion page. Values:
NOT CONNECTED,
IN1, or IN2. De-
fault: NOT CON-
NECTED
NO WARNINGS
selection page.
Values: NOT CON-
NECTED, IN1, or
IN2. Default: NOT
CONNECTED
DATA-PORTS
PORT 2
Configures, which
kind of traffic
unit is connected
to port 1: NOT
CONNECTED, AT1,
FLARM, , Power-
FLARM, GARMIN
TIS, Default: NOT
CONNECTED
PORT 1
Configures, which
kind of traffic
unit is connected
to port 1: NOT
CONNECTED, AT1,
FLARM, , Power-
FLARM, GARMIN
TIS, Default: NOT
CONNECTED
POWER ON MODE:
Values ON or OFF.
Default: ON
ILLUMINATION
LIGHTING BUS
LIGHTING BUS
MAX
LIGHTING BUS
voltage for maxi-
mum illumination
intensity: Values
from 0V to 100V.
Default: 12.00V
LIGHTING BUS
MIN
LIGHTING BUS
voltage for mini-
mum illumination
intensity: Values
from 0V to 100V.
Default 0
LIGHTING BUS SRC
LIGHTING BUS
source selec-
tion page. Val-
ues: NOT CON-
NECTED, USENS1,
or USENS2. De-
fault: NOT CON-
NECTED
MAXIMUM
Global maximum
allowed illumina-
tion intensity: Val-
ues from 0 (dark)
to 100 (full bright).
Default: 100
MINIMUM
Global minimum
allowed illumina-
tion intensity: Val-
ues from 0 (dark)
to 100 (full bright).
Default: 1
MANUAL INTEN-
SITY
Illumination inten-
sity configuration
page for man-
ual mode: Values
from 0 (dark) to
100 (full bright).
Default: 80
MODE. Parameters
MANUAL, AUTO,
or LIGHTINGBUS.
Default: MANUAL
ATD
·
Installation Manual
·
rev. 3.0
·
2019/05/09
41
