background image

 

 

LIMITED WARRANTY 

 

TRUCKMASTER 

 

Air-Care warrants this product to be free from defects in materials and workmanship to the original 
purchaser for a period of Two (2) years from the date of purchase.  Components listed below are 
excluded from this Two year period and are covered for periods described below: 
 

 

 

 

 

 

 

 

 

                      Circuit Board & Remote 

 

 1 Year 

   

Speed 

Controller 

   

Year 

 Hose & Motor Assembly       

 90 Days 

 

 

 

 Brush Assembly 

 

 

 No Warranty 

 
Warranty covers both parts and labor (labor is to be performed at Air-Care’s facility located at 3868 E. 
Post Road; Las Vegas, Nevada). 
 
Warranty is extended to the original purchaser and is 

not

 transferrable. 

 
This warranty does not extend to any damage to a product caused by or attributable to freight 
damage, abuse, misuse, improper or abnormal usage.  Warranty is also void if the product has been 
modified or altered in any way. 
 
The purchaser is responsible for the cost of shipping the equipment to Air-Care’s facility for 
evaluation.  If found to be defective and covered by the terms of this warranty, Air-Care will pay 
FedEx ground shipping charges on the repaired or replaced item back to the purchaser’s location.  
Any additional expedited service charges for quicker shipping shall be born by the purchaser.  If the 
product or component is not found to be a warranty issue, the purchaser will be responsible for return 
shipping charges. 
 
Air-Care is not responsible or liable for indirect, special, or consequential damages arising out of or in 
connection with the use of performance of the product; damages with respect to any economic loss, 
loss of property, loss of revenues or profits, loss of use, or other incidental or consequential damages 
of whatsoever nature. 
 
The warranty extended hereunder is in lieu of any and all other warranties, and any implied 
warranties of any type. 
 
This warranty gives you specific rights.  These rights and others vary from state to state. 
 

Division of D.P.L. Enterprises Inc. 

3868 East Post Road, Las Vegas, Nevada  89120, (702) 454-5515, FAX (702) 454-5225 

Website:  www.air-care.com; E-mail:  Info@Air-Care.com 

Page 14 of 15 

Summary of Contents for TruckMaster
















Reviews: