www.airdryclotheslines.com.au
5
Step 8:
Lifting and lowering the
inner
frame: Lift the front bar and
insert the inner stay into the hole of each arm.
Lifting and lowering the outer frame: Lift the front bar
evenly from the
centre
slightly past horizontal until you
heard both struts click and engage. Gently release the front
bar. To disengage the struts and lower the frame, lift the
bar evenly from the
centre
until both struts click and lower
the frame.
Please note
, if the front bar is lifted in an uneven manner, both struts will not engage. If this happens,
reset by disengaging the strut and lower the frame. Start the process again, making sure to place your
hands directly in the
centre
and lifting evenly.
Warning
: Do not continue to lift the bar past the engaging point (struts clicking) as this will break the
strut mechanism and a new strut will be needed at the cost of the consumer.
