Dear customer
AIR ET SANTÉ would like to thank you for the trust you place in its air purifiers. As all
our attention is focused on your complete satisfaction, here are a few tips for use.
Your A&S 300 is optimal for purifying an area of about 80 m2. It has
6 filtration stages:
1
2
3
4
5
6
1
Pre filter
: captures the smallest particles and protects the HEPA filter.
Medical grade HEPA filter
: 99.95% efficient on particles larger than or equal to 0.1
µm (PM2.5).
Activated carbon filter
: fixes and retains gaseous pollutants (volatile organic
compounds).
Catalysis & photocatalysis
: transforms pollutants into carbon dioxide and water
steam.
Photocatalysis and UV
: UV lamps activate titanium dioxide and degrade pollutants
into carbon dioxide and water steams.
Negative ions
: charged (-) they aggregate with pollutants (+) and cause them to fall to
the ground.
• Your purifier can be used continuously; in this case we recommend that you leave
it in automatic mode, its particle detector will then control its operation completely
independently.
• Your purifier can be used in manual mode, so you can set it to high fan power to
quickly purify the air in your room, and then set it back to automatic mode.
