7
Manuel A&S 300 -
UV lamps replacement
The lamps are in their slots, behind the filter block.
Carefully remove the old lamps and insert the new ones.
Malfunctions
For any questions that are not covered in this manual, a dedicated service is
available via our website at:
The appliance does not start:
Verify the power supply.
The volume of air produced seems low:
Verify the cleanliness of the filters.
Make sure that the plastic protection films of the filters have been removed.
The air quality is not improving, despite a long running time:
Replace the filters.
After closing the cover, the purifier will not start again:
Verify that the safety system on the inside of the cover is properly connected.
A small alarm sounds and the filter replacement light flashes:
Replace the filter and press the Reset button.
