Mounting Directions and Operation
Operation
Mounting Directions
5
The AFToGo Mobile is intended for spaces up to 175 sq. ft.(mbl175). For best
results the unit should be placed in an elevated area.
Do not place unsecured on the vehicles dash board.
When mounting your AFToGo Mobile in a vehicle place it securely so it does
not obstruct the drivers view of the road or interfere with vehicle operating controls.
Step 1
Slide mounting bracket
(A) into slots (B) on bot-
tom of unit until tab (C)
clicks locking bracket
firmly in place.
Step 2
Remove wax paper
from bottom of mount-
ing bracket (A) exposing
adhesive. Firmly press
adhesive against the de-
sired mounting surface.
Step 3
To remove unit from
mounting bracket (A)
firmly press on tab (C)
and slide mounting
bracket towards front of
unit.
Press the “FAN” button to start unit.
Press and hold the “FAN” button 3 sec-
onds to turn off unit.
The fan speed can be increased or de-
creased by pressing the “FAN” button.
The amount of ions being produced can be adjusted by pressing the “ION” but-
ton.
For areas of low pollutant concentrations or in confined areas the “FAN” and
“ION” settings should be set to “LO” as indicated by the green light.
For areas of higher pollutant concentrations, such as cigarette smoke, or in larger
areas the “FAN” and “ION” settings should be set to “HI”.
