INSTRUCTION OF FUNCTION MODE:
Unit makes a “BEEP” sound when powered on. Then when
switch button is in humidity mode, the indicator light of the
Dehumidifier will light up. The default setting for humidity is
60%, the machine’s dehumidifying range is 30%-90%. Use
the Humidity Up and Down buttons to adjust the humidity
setting. If you keep pressing the Humidity Down button when
the humidity setting is at 30%, the unit will go into continuous
dehumidify mode which will show as “CO” (Continuous
Operation) on the LCD display. The humidity % will flash
when setting the humidity, then display current humidity after
5 seconds.
SAFE OPERATION AND MAINTENANCE
• This machine is for indoor use only
• When there is any abnormal (burning smell), please shut off
the machine and unplug power. Fire, electric shock and
failure may be caused.
• If machine not in used for a long time, please unplug the
power cord. When cleaning the machine, stop it first and
unplug the power cord.
DO NOT
• Do not stop operation of dehumidifier by pulling out of the
power cord. Otherwise fire or electric shock accident may be
caused.
• Do not place near anything that gives off a heat source such
as; furnace or heater. This may cause a fire.
• Do not connect relay, extension cord or adaptor which this
machine. Otherwise, fire. Electric shock and overheating can
be caused.
• Do not repair, disassemble or alternate the machine without,
authorization so as to avoid fire or electric shock. This will
void your warranty.
4
