4
Product Overview
Setting Up
Step 1:
Place the machine on a flat surface and in a suitably large area with at least 50 cm of open
space around the machine.
Step 2:
Fill the fluid tank with Air Guard fluid.
Step 3:
Connect the machine to a suitably rated power supply.To determine the power requirement
for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly grounded to
avoid risk of electrocution.
Step 4:
Turn on the machine and allow it to heat up. Heat up takes approximatly 4 mintues. Once
the machine has reached operating temperature, the display will show Ready to Faze. Now the
machine is ready for operation.
Step 5:
To start making haze, press the VOLUME button on the control panel.
Fluid Tank
LCD control panel
Wireless receiver (antenna)
XLR 3-Pin DMX Connector
XLR 5-Pin DMX Connector
Neutrik PowerCon
Power Switch
