7
DMX Connector Pin Assignment
The machine provides a 3- or 5-pin XLR connector for DMX connection. The diagram below indicates
pin assignment information.
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
DMX Operation
Making the DMX Connection
– Connect the machine to a DMX controller or to one of the machines
in the DMX chain. The machine uses a 3-pin or 5-pin XLR connector for DMX connection, the
connector is located on the back of the machine.
Address Setup
– Use control menu to set DMX address. The machine occupies 2 control channels.
The starting address is defined as the first channel from which the machine will respond to the
controller. Always double check to make sure there are no overlapping channles in order to control
the machine correctly.
