9
Wireless Receiver
Transmitter setting
By default [A] button is set to activate and deactivate. To change activation button, simply press desire
button within 15 seconds after power is turn on.
Registering a transmitter
Transmitter can be paired from the receiver. Each receiver can pair up to 5 transmitters. Follow
below steps to pair transmitter from receiver.
Step 1: Turn on machine and turn on wireless remote control function.
Step 2: Power off machine and turn on again
Step 3: Wait until display show “Wireless Detecting”
Step 4: Press [A] button on the transmitter to pair
Notes:
1.
Once the wireless remote control function is turned On, the letter “W” will be displayed
on the LCD screen.
2.
Once the wireless remote control function is turned On, the LCD screen will display
“Wireless Detect …” each time when the machine is turned on; this allows users to pair
new transmitter with the machine’s receiver. Every new registration overwrites the
previous memory.
3.
One machine can be controlled by up to 5 transmitters while one transmiter can be
registered to an unlimited number of machines.
Wireless Detecting
