background image

www.airkinglimited.com

210575917 Rev. A 1-06

4 of 8

LIMITED WARRANTY

All products manufactured by Air King Limited are warranted for one year from the date of purchase against defects in workmanship and/or material. In addition,
all ventilating/exhaust fans, heaters, combination fan lights and/or heaters, and range hoods are guaranteed for five years from the date of purchase against
defects in workmanship and/or material.

This warranty does not cover any labor or shipping costs or the cost of replacement components as part of routine maintenance such as: range hood grease
filters, charcoal filters or combination charcoal/grease filters; replacement light bulbs in range hoods or bathroom fan/light/bulb heater combinations. As well,
any damage or failure caused by abuse, misuse, abnormal usage, faulty installation, or improper maintenance will not be covered by this warranty.

In order to make a claim on this warranty, you must be the original consumer of the product. You will be required to present to Air King the original bill of sale
showing: date of purchase, place of purchase and model purchased. Failure to meet these requirements will void your warranty.

Air King will not be held responsible for any bodily injury or damages to personal property or real estate whether caused directly or indirectly by the product.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages and some states do not allow limitations on how
long an implied warranty lasts, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may have other
rights which vary from state to state and province to province.

FOR PARTS OR TECHNICAL ASSISTANCE

Please call: 1-800-465-7300, 

MONDAY THROUGH FRIDAY, BETWEEN THE HOURS OF 8 AM AND 4:00 PM EST.

PLEASE DO NOT RETURN PRODUCT TO PLACE OF PURCHASE.

Reference the type and style of product (located on label inside of the product) when you call.

For more information please visit our website: wwwairkinglimited.com

Installer: _________________________________________________________

Installation Date:_________________________________________

Place of Purchase: _________________________________________________

Model Number: __________________________________________

#

Qty. Description

Replacement Part #

1

1

AK917 Fan Housing

5S3402080

1

AK927 Fan Housing

5S3402090

2

4

Mounting Rails

5S1299002

3

1

Collar

5S3402041

4

1

Damper

5S3402042

5

1

Overheat Protector

5S3402081

6

1

Mounting Plate Over Heat

5S3402082

7

1*

Mounting Plate Lamp Holder

5S3402083

8

1*

Lamp Holder

5S3402084

9

2

Grill Springs

5S3402085

10

1

AK917 Grill

5S3402086

1

AK927 Grill

5S3402091

11

1

Internal Wire Cover

5S3402087

12

1

External Wire Cover

5S3402088

13

2

Nut

5S3402045

14

2

Spacer

5S3402044

15

1

Motor

5S3402043

16

2

Lockwasher

5S3402046

17

1

Motor Bracket

5S3402047

18

2

Washer

5S3402048

19

2

Lockwasher

5S3402049

20

2

Hex Nut

5S3402050

21

1

Blower Wheel

5S3402051

22

1

14 ga Ground Wire

5S1999003

23

1

#10 Ground Screw

5S1999002

24

2

#8 Screw

5S1999004

25

2

Screw

5S3402064

26

2

Screw - Collar

5S3402040

27

1

Polarized Receptacle

5S3402089

Troubleshooting Guide

Trouble

Probable Cause

Suggested Remedy

1. Fan and/or lamps do not operate when switch is on.

1a. A fuse may be blown or a circuit tripped.

1a. Replace fuse or reset circuit breaker.

1b. Connector plug from motor is not plugged in.

1b. Turn off power to unit. Remove Grill and plug motor into receptacle

in housing. Restore power to unit.

1c. Wiring is not connected properly.

1c. Turn off power to unit. Check that all wires are connected.

1d. Motor has stopped operating.

1d. Replace motor.

2. Fan is operating, but air moves slower than normal.

2.

Obstruction in the exhaust ducting.

2.

Check for any obstructions in the ducting. The most common are bird nests
in the roof cap or wall cap where the fan exhausts to the outside.

3. Fan is operating louder than normal.

3a. Motor is loose.

3a. Turn off power to unit. Remove grill and check that all screws are fully

tightened. Restore power to unit.

3b. Fan blade is hitting housing of unit.

3b. Call your dealer for service.

* Model AK927 quantity - 2

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

Summary of Contents for AK917









Reviews: