9
MN-870
Air Lift Performance
Before Operating
1. Next, completely deflate and reinflate the air bags 2-3 times. This procedure will purge any
trapped air in the dampers and allow for maximum performance. For ride performance and
the most versatility, Air Lift Performance recommends setting the strut dial (if equipped)
to position 6 or higher.
MAKE SURE THE FRONT WHEELS ARE STRAIGHT WHEN DEFLATING AND
REINFLATING AIR BAGS.
2. Inflate and deflate the system (do not exceed 125 PSI) to check for clearance or binding
issues. With the air springs deflated, check clearances on everything so as not to pinch
brake lines, vent tubes, etc. Clear lines if necessary.
3. Inflate the air springs to 75 PSI - 90 PSI and check all connections for leaks.
4. An air management system such as Air Lift 3H/P is highly recommended for this product.
5. Please familiarize yourself further with this product by reading the Product Use,
Maintenance and Servicing section.
CAUTION
