WirelessONE
Introduction
The purpose of this publication is to assist with the installation, maintenance and
troubleshooting of the WirelessONE System.
It is important to read and understand the entire installation guide before beginning installation
or performing any maintenance, service or repair. The information here includes a hardware
list, step-by-step installation information, safety information and a troubleshooting guide.
SYSTEM INFORMATION
WirelessONE is designed for automatic digital leveling of the on-board compressor system.
The kit includes a compressor, manifold, wiring harness, and wireless digital controller. The
system can be used in or outside the vehicle, for adjustments in full view of the vehicle.
The wireless digital controller is a compact, battery powered unit. It also includes a clip
that can be attached to the vehicle’s visor. Three user-defined memory settings are
provided for frequently used settings. As an added safety measure, minimum air pressures
are automatically maintained. The manifold is also weather resistant for maximum life
expectancy.
IMPORTANT SAFETY NOTICE
The installation of this kit does not alter the Gross Vehicle Weight Rating (GVWR) or payload
of the vehicle. Check your vehicle’s owner’s manual and do not exceed the maximum load
listed for your vehicle.
Gross Vehicle Weight Rating: The maximum allowable weight of the fully loaded vehicle
(including passengers and cargo). This number — along with other weight limits, as well
as tire, rim size and inflation pressure data — is shown on the vehicle’s Safety Compliance
Certification Label.
Payload:
The combined, maximum allowable weight of cargo and passengers that the truck
is designed to carry. Payload is GVWR minus the Base Curb Weight.
SCHEMATIC CIRCUIT INFORMATION
Example:
AL004 (PK-18GA) Ignition
Circuit
Number
Wire
Color
Wire
Size
Circuit
Function
(1st & Last Letter)
