Monnal T75 user manual
27
28
•
Connect the expiratory limb of the patient circuit to the expiratory valve of the ventilator: (27).
•
Connect the inspiratory limb of the patient circuit to the inspiratory outlet cone of the ventilator:
(28).
CAUTION:
Make sure to limit dead space while installing patient circuit and accessories.
Air Liquide Medical Systems
recommends the use of a bacteriological filter at the inspiratory outlet
of the ventilator or, preferably, at the Y-piece. It is also recommended to use patient circuits equipped
with water traps when using a humidifier.
2
1
1
Y-piece
2
Double-limb patient circuit
CAUTION:
Empty the water traps regularly during ventilation.
When using the equipment on a patient for the first time, make sure that you follow the hospital’s hy-
giene protocol for new single-use equipment or adequately sterilized reusable equipment. The acces-
sories and consumables (patient circuit, masks, expiratory valves, adapters, nebulizer, etc.) are gener-
ally available in single-use and autoclavable versions.
CAUTION:
Reusing single-use accessories or consumables carries the risk of patient cross-
contamination.
3.2.4 CO2 Measurement Probe
See CO2 Option on page 43 (for ref. KB033600).
3.2.5 Humidifier
If the ventilator is used with a humidifier ensure that it is always placed lower than the ventilator and
the patient.
Empty the water traps regularly in order to limit condensation in the pipes.
20
Summary of Contents for MONNAL T75
Page 2: ......
