3. Remote Access to VS-100
AirLive VS-100 User’s Manual
18
3.2 Access the VS-100 via Internet Explorer
1.
Start the web browser on the computer and type the IP address of the Network Camera
you want to monitor as below:
The Login Window of the Camera
is prompted:
2.
Type in your login name and password under “USERNAME” and “PASSWORD” textbox.
For the first time use (default value), input the
User Name:
admin
Password:
airlive
That’s, type in “
admin”
on the “USERNAME” as a default name and type in “
airlive”
on the
PASSWORD textbox. Click “OK” button to start the main menu.
3.
According your browser’s security setting, the IE Web Page may prompt the “Security
Warning” window. If so, select “Yes” to install and run the ActiveX control into your PC.
Otherwise, the system will load the ActiveX silently.
4.
After the ActiveX control was installed and ran, the first image will be displayed.
