The base of the fan has two parts which fit around the tower.
1. Put the two parts of the base together; be aware to put the power cord in the center hole
before assembling it.
2. Place the base in the right way aligning it with the mark placed on the tower (figure 2 )
3. Attach the base to the tower by putting the screws in the holes.
4. Block the power cord in the cut-out. (Figure 3 )
ASSEMBLY INSTRUCTION
figure 1
figure 2
figure 3
1
1
2
2
CONTROL PANEL
OPERATING INSTRUCTIONS
Place the fan on a stable flat surface. Plug
the power cord into a 220-240V electrical
outlet.
①
POWER
: Turn the fan on by pressing the
‘POWER’ button; turn the fan off by pressing
the ‘POWER’ button a second time.
②
SPEED
: by pressing ’SPEED’ you can
adjust the speed with 3 air flow intensities:
low, medium, or high. (indicated on the LED
display
).
③
MODE
:By pressing the ’MODE’ button you
can choose between 3 different modes:
•
NORMAL
(indicated on the LED
display )
.
•
NATURAL WIND
which alternates
different kinds of speed to create a
1
2
3
4
5
B
C
A
B
C
D
E
F
8