5
SPECIFICATIONS
- IMPORTANT -
THE SPECIFICATIONS GIVEN IN THIS PUBLICATION DO NOT INCLUDE NORMAL MANUFACTURING TOLERANCES.
THEREFORE, THIS UNIT MAY NOT MATCH THE LISTED SPECIFICATIONS EXACTLY. ALSO, THIS PRODUCT IS TESTED
AND CALIBRATED UNDER CLOSELY CONTROLLED CONDITIONS AND SOME MINOR DIFFERENCES IN PERFORMANCE
CAN BE EXPECTED IF THOSE CONDITIONS ARE CHANGED.
SPECIFICATIONS
Dimensions:
8
0”H x 27”W x 26 ¼”L
Weight:
360 Lbs. installed weight
430 Lbs. shipping weight
Cabinet:
16 gauge welded steel cabinet with a powder coat finish. Built-in sump and drain
connection for oil mist removal.
Standard Motor:
1 HP, ball bearing
Standard Blower:
Forward curved, sleeve bearing, belt driven, centrifugal blower, capable of moving
4600 CFM free air.
Instrumentation:
Dirty Filter Gauge
– Factory installed pressure gauge designed to determine filter
replacement cycle.
Indicator Light
– Light indicates that the blower motor is energized properly.
Noise Levels:
With 1 HP motor @ 9 feet = 67 dBa, @ 15 feet = 66 dBa
Power Input:
Amps
Vac, Hz, Ph
1 Hp
2 Hp
3 Hp
2 Hp BI
3 Hp BI
5 Hp BI
120, 60, 1
12
NA
NA
NA
NA
NA
208-240, 60, 1
6.6
9
NA
NA
NA
NA
208-240,60, 3
3.8
7
9
5.9
8.6
13.3
440-480, 60, 3
1.9
3.5
4.4
2.9
4.3
6.6
CFM:
Static Pressure
Airflow (cubic feet per min)
(inches of water)
1 Hp FC
2 Hp FC
3 Hp FC
2 Hp BI
3 Hp BI
5 Hp BI
1.5
1800
2850
3500
2200
3700
4100
2
1400
2500
3250
2100
3600
3900
3
850
2000
2700
1900
3200
3700
4
1450
2150
1700
2800
3500
5
1400
2400
3200
6
1100
1800
2800
7
2600
8
2300
FILTER OPTIONS
Prefilter:
Two 24” x 24” x 2” aluminum mesh grease impingers.
Primary Filter Options: See Parts List
Carbon Filter Option
– PN 07096: Forty five lbs. activated, refillable carbon module. Please note that the
maximum airflow rating for the carbon module is 1000 CFM. If the carbon filter is ordered, the airflow will
be factory set at 1000 CFM.
Note: With Carbon Filter option a Rigid or Extended Service Filter must be used.
Air Quality Engineering, Inc., has a policy of continuing product improvement and reserves the right to make changes in design and
specifications without notice.
Summary of Contents for M660
Page 12: ...12 PARTS IMAGES ...