STANDARD CMOS SETUP
Use the standard CMOS Setup screen to check or modify general
configuration information such as the date, time, floppy type, hard disk
type, video type, etc.
·
Date
(Month/Date/Year): You manually set the electronic calendar
only if the values are incorrect.
·
Time
(Hour/Minute/Second): The time here is 24-hour time. You
would enter 5:30 P.M. as 17:30:00.
·
Hard Disk C:/D: Type
: The BIOS provides 46 predefined types of
popular hard disk drives. Relevant specifications include the number
of cylinders and heads, write pre-compensation time, read/write head
landing zone, number of sectors per track. A hard disk will not work
properly if your enter incorrect drive parameters.
If your particular drive is not one of the 46 pre-defined types, simply
scroll down to select type "User" and enter the appropriate values for
cylinders
,
heads
,
WPcom
,
LZone
, and
sectors
.
Size
is
automatically determined by the other entries. You can also let the
BIOS to determine the drive type by selecting "
IDE HDD AUTO
DETECTION
" from the Main Menu.
·
Floppy Drive A: Type
(360KB, 720KB, 1.2MB, 1.44MB, 2.88MB, or
None): Specify the type of the first floppy drive installed on the
system. "None" could be used as an option for diskless workstations.
·
Floppy Drive B:
Type
: Specify the type of the second floppy drive
installed on the system.
·
Video:
(EGA/VGA, CGA 40, CGA 80, MONO) Normally select "EGA/
VGA".
After all selections have been done, press <
Esc
> key to exit this section.
486VP System Board User's Manual Page 29
Summary of Contents for 486VP
