20
Global FX1–2
(continued)
Parameter Description
Value
Range
Tape Delay
Tape Head
On/Off 1–4
Enables or disables each tape head, which
create multiple delay points.
Off, On
Tape
Head
Delay 1–4
Percent from the original
Delay
value that each
tape head is set to. At 100%, the tape head uses
the full Delay amount.
0–100%
Tape Head Mix
1–4
Wet/dry amount of the tape head.
0–100%
Tape Head Pan
1–4
Stereo panning of the tape head.
L100 – C – R100
Tape
Head
Feedback 1–4
Amount of signal from the tape head fed back
into the delay line.
0–100%
Sync
Sync the
Delay
to the
Global Tempo
or turn
Off
to adjust
Delay
by milliseconds or seconds.
Off, On
Delay
Amount of time between the dry signal and the
delayed signal.
When
Sync
is
Off
: 1 – 4000 ms
When
Sync
is
On
: 16, 8T, 16D, 8, 4T, 8D, 4, 2T,
4D, 2, 1T, 3/4, 4/4, 5/4, 6/4,
7/4, 8/4
Speed
Rate that the simulated tape moves.
0.0 – 15.0 ips
Input
Level of the incoming signal.
-inf – 0 – + 12.0 dB
Output
Level of the outgoing signal.
-inf – 0 – + 12.0 dB
Feedback
Amount of signal fed back into the delay line.
0–100%
Low Cut
Center frequency for delay signal low-cut filter.
20.0 Hz – 1.0 kHz
High Cut
Center frequency for delay signal high-cut filter.
1.00 kHz – 20.0 kHz
Mix
Wet/dry amount of the delay effect.
0–100%
Wow Rate
Speed of wow pitch variation.
0.10 – 20.0 Hz
Wow Depth
Modulation depth of wow pitch variation.
0–100%
Flutter Rate
Speed of flutter pitch variation.
10.0 Hz – 1.00 kHz
Flutter Depth
Modulation depth of flutter pitch variation.
0–100%
Multitap
Delay
See
FX1–3
.
Highpass
See
FX1–3
.
