23
Global FX1–2
(continued)
Parameter Description
Value
Range
Amp Sim
Cab Model
Type of amplifier simulated.
D.I., Brit, 1x8”, 1x12”, 2x10”,
2x12”, 4x10”, 4x12”, 1x15”
Bass, 4x10” Bass, Radio
Drive
Amount of drive applied.
0.0–11.0
Feedback
Amount of amplifier feedback.
0–100%
Output
Output level of the amp signal.
-12.0 – 0.0 – +12.0 dB
Soft Clip
Amount of softening applied to the clipped signal to
decrease high-frequency harmonics and add warmth.
0–100%
Top
Boost
Amount of gain boost to treble frequencies.
0–100%
Edge
Adjust
clipping
from
being symmetrical to being
asymmetrical, which makes it sound richer, and
nastier at high settings.
0–100%
Treble
Dampens or maximizes high end frequencies.
-12.0 – 0.0 – +12.0 dB
Mid
Dampens or maximizes mid-range frequencies.
-12.0 – 0.0 – +12.0 dB
Mid Freq
Center frequency for the mid-range EQ.
250 Hz – 4.00 kHz
Bass
Dampens or maximizes low end frequencies. -12.0
– 0.0 – +12.0 dB
Mono/Stereo
Determines whether the simulation is mono or
stereo.
Mono, Stereo
TalkBox
LFO Wave
Type of waveform used for the LFO.
Sine, Tri, Saw, Square, S&H,
Random
LFO
Sync
Sync the
LFO
Rate
to the
Global Tempo
or turn
Off
to adjust
LFO
Rate
by Hz.
Off, On
LFO Rate
Speed of LFO modulation.
When
Sync
if
Off:
0.01 – 10.0 Hz
When
Sync
in
On:
8/4 – 16
LFO Depth
Amount of modulation applied.
-100 – 0 – +100%
Vowel
Shape of the formant filter, by the vowel sound that
is simulated.
0.000–1.000
OO, OU, AU, AH, AA, AE,
EA, EE, EH, ER, UH, OH, OO
Formant
Shifts the center formant up or down by semitones. -12.00 – 0.00 – +12.00
Mix
Wet/dry amount of the talk box effect.
0–100%
Env Threshold Amplitude threshold at which the Formant setting
begins to be modulated by the Envelope follower.
-60.0 – 0.0 dB
Env
Attack Length of time for the envelope to trigger.
0.1 – 10.0 s
Env Release
Length of time for the envelope to release.
0.1 – 10.0 s
Env Depth
Creates a positive or negative offset in the setting of
the Vowel control, effected by the Envelope follower.
When the envelope follower is triggered, the Vowel
parameter moves to its normal setting and then back
to the offset value.
-100 – 0 – 100%
