background image

 

 

 

Unpacking Warning 

 

After unpacking the device, make sure there is no damage from transportation and that 

your order is complete. In the event of damage or an incomplete delivery, contact us at 

support@air8.tech 

or +34 937 374 430.

 

 

Do not throw away the original box instantly. It can be reused for packing in the event you 

need to return the device. 

 

Dispose of the packaging material responsibly. Packaging materials should be kept away 

from children.  

 
 

Safety instructions 

 

Read the safety instructions carefully before installing and starting the device. By not 

following the safety instructions you may expose yourself to electric shock, fire and/or 

serious injury/death. Attempting to service this air purifier will void the warranty and 

could cause serious personal injury to the user and/or result in considerable damage to 

the unit.  

 

In case of damage, do not try to repair the device yourself – always reach out to our AIR8 

specialists for such procedures.  

 

Keep all safety instructions in case they are needed in the future. 

 

  

 

Disconnect the plug from the main socket before opening the device.  

 

Always remove the plug from its power outlet by holding onto the plug itself and pulling 

gently. Never pull on the cord itself to unplug it from its power outlet.  

 

Check the voltage of 220-240V before use. 

 

Check the main plug before plugging in. 

 

When not in use, unplug the device from the wall outlet. 

 

Never run the air purifier unless it is fully assembled. 

 

Do not insert any objects into the air inlets and outlets of the unit as it may cause a short 

circuit. Special care must be taken when operating the device within the reach of children. 

 

Do not run the power cord under carpets or cover with rugs. 

 

Do not place the cord near a heated surface. 

 

Do not pull the cord against or around sharp corners and edges. This could result in injury to 

the user or damage to the cord. 

 

Never use the power cord to pick up, carry, drag, pull or lift the air purifier. 

 

Use the ON/OFF switch to turn the device “on” and “off”. 

 

The product power plug must be inserted into a power supply that is grounded. Please do 

not use other forms of power supply.  

 

Do not use the plug to turn the device “on” or “off”. 

 

Before changing the device, switch it off and unplug from the wall. 

 

Do not attempt to clean the air inlets or outlets with sharp objects. 

 

Do not put water in or on the device.  

 

Do not operate the device in a damp room (e.g. bathroom). Danger of electric shock or 

power transfer.  

 

It is strictly forbidden to use flammable and explosive substances (such as alcohol, hairsprays, 

acetone, gasoline, oil, paint thinner, etc.) to wipe any part of/in the product to avoid 

fire/explosion, personal injury and property damage. 

Summary of Contents for 1000i PRO















Reviews: