2. Remove the exhaust hose or carbon filter and, if
present, close the exhaust hole (a).
3. Place an O-ring (B) over the connecting piece
(b) and tighten the hose clamp.
(b)
(a)
Mounting Instructions RONDO
8
4. If the adapter (D) is used, place it on the connec-
ting piece (b) and slide the second O-ring (B) on top
over the adapter.
5. Place the filter (A) on the adapter (D) or directly
on the exhaust port (b) with the O-rings already
installed.
Only mount the adapter (D) if the
motor exhaust port (b) is too close to
the wall.
