#200-104 INSTALLATION INSTRUCTIONS
1988-95 G.M. 5.0-5.7 T.B.I. Engines
Thank you for purchasing the
“AIRAID”
Intake System.
Please read the instruction manual carefully before proceeding with the installation. Contact AirAid (480-443-3333: 8:00
AM - 5:00 PM MST weekdays ) for questions regarding fit or instructions that are not clear to you.
Your intake system was carefully inspected and packaged. Check that no parts are missing or were damaged during
shipping. The air filter element is protected from direct exposure to water and debris in its new location. Care should be
taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILITY !
The conical air filter is washable oiled cotton gauze element. It is a lifetime element.
Tool List
Ratchet wrench
10 mm socket
5/16 socket or nut driver
3/8 socket
6” socket extension
Flat blade screwdriver
Pliers
PARTS LIST
KITP300 S.S. COUPLER 1
KIT104TAC TUBE 13” X 3.5” 1
KIT104H PLASTIC T.B. ADAPTER 1
KITFEL60038 T.B. GASKET 1
700-420 FILTER 3.5” x 9” 1
KIT104HP HARDWARE PACK 1
INSTRUCTION SHEET x1
KITPOLISHEDB SUPPORT BRACKET x1
KITBOLT51618 3/8” X 1” BOLT x1
3/8” LOCKING NUT x1
KITACDSTUD S-SHAPED 6MM STUD x1
KITBN41187 6MM WASHERED NUT x1
KITNUT ALUM INUM NUT x1
KITGATES2019 RUBBER ELBOW x1
KITSNP18M4 RATCHET CLAMPS x2
EVG042 AIRAID DECAL x1
