© Copyright AirBench Ltd 2016
Page 4 of 19
INTRODUCTION
Overview
Thank you for choosing AirBench as your fume or dust control system. Please read this document before
installation and use.
This document details maintenance activities which are essential to the safe use of your AirBench. We
recommend that the Responsible Person reads this manual fully prior to installation and operation of the
AirBench.
This document refers to the AirBench FN type. Models of this type are available with a range of filter
configurations. The filter configuration in use is detailed on the system Commissioning Certificate and is used
within this document to provide filter-specific maintenance information.
About AirBench
AirBench is a self-contained down draught extraction bench which utilises a fan and filter combination selected
for your specific application, to extract and filter dust/fumes and return filtered air to the work place.
Some models vary in filtration and filtered air delivery point.
It is used by running the fan at either fixed speed or variable speed (if speed controller fitted) to draw the
pollutant down and through the filters, allowing the process to proceed on the surface.
About this Document
This document provides general maintenance and operation instructions for the AirBench FN range. It should
be read in conjunction with the Commissioning Certificate supplied with the unit. If you have any concerns or
doubts about maintenance or operation of this unit, contact the manufacturer.
