13
5. ENGINE STARTING - USER’S MANUAL SOLO AIRLINER-RS
5.5. STARTING & STOP TURBOFAN (BOEING 737) ENGINES (ONLY
MFS/P3D)
Starting turbofan (Boeing 737) engines (only MFS/P3D)
In this type of engine RPM and PROP MIXTURE handles are not used,
however, the MIXTURE handle must be outside the CUTOFF area.
1. Pull on the
PARKING BRAKE
.
2. Move the
POWER
handle to
DEC
.
3. Switch on the
BAT
.
4. Switch on the
L ENG “START
”, the left turbine will begin to rotate.
5. When the indicator
N1
reaches the 2.7 value, switch on the
FUEL
VALVE “LEFT”
.
6. Once the left engine is running switch off the
L ENG “START”
.
7. Switch on the
GEN 1
to charge the batteries.
8. Switch on
L ENG “HYD PUMP
” to activate the hydraulic systems.
9. Switch on
M. AVIONICS
.
This procedure has started the left engine, do the indications 4, 5, 6, 7,
8, 9 to start the right engine.
IMPORTANT! Before activating GEN do not forget to disable
START, if don’t do that the generator will not charge the batteries
Stop turbofan engines (only MFS/P3D)
1. Pull on the
PARKING BRAKE
.
2. Switch off the
FUEL VALVES
.
3. Switch off the
M. AVIONICS
.
4. Switch off the
GEN
.
5. Switch off the
HYD PUMP
.
6. Switch off the
BAT
.
1
5
1
9
3
3
6
7
4
4
6
8
5
2
5
2
Starting turbofan engines
Stop turbofan engines
