20
7. RADIOSTACK PANEL - USER’S MANUAL SOLO AIRLINER-RS
7.4. DME, ADF AND TRANSPONDER
DME
Due to MFS / P3D / X-Plane limitations, it always works in remote mode
(RMT), which means it is always associated with NAV1 or NAV2; you
can't select an independent frequency. If no signal is received from the
DME, the display shows dashes.
Definition of buttons
Move the selector 1–2 to find out the distance (nautical miles), Speed
(Knots), Time (Minutes) up to the station selected in NAV1 or NAV2.
ADF
Definition of buttons
Dial:
Rotate to change the frequency in increments of "000.1" or rota-
te keeping the dial pressed to change the frequency in increments of
"010.0".
<> Button:
Use to change between USE and STBY frequencies.
TRANSPONDER XPDR
Definition of buttons
Select the digit to be modified:
Press the dial as a push-button to chan-
ge the digit you want to modify (the selected digit is displayed with a
small number).
Modify the value of the digits:
Turn the dial, the value varies between
0 and 7.
Function selector:
Rotate and press the dial at the same time, the
functions varies between OFF, STBY, ON, ALT.