21
8. MULTIPLE SOLO AIRLINER OR MULTIPLE MFS/P3D/X-PLANE COMPUTER IN THE SAME NETWORK
If you connect more than one SOLO to the same network, you should be
aware that to use them simultaneously you should have more than one
computers using MFS / P3D / X-Plane connected to the same network
and indicate the right MFS / P3D / X-Plane computer to each SOLO, as
detailed below.
• Connecting a PC to one of the SOLO, just can be turned on the SOLO
which you want to connect. When you will execute
VFConnect3.exe or
VFConnect3-Xplane
, it will detect the active SOLO and will connect.
• Once a PC and SOLO are connected, they will remain connected du-
ring the session. At this point, if a second SOLO is turned on and a
second PC runs
VFConnect3.exe or VFConnect3-Xplane
, this just will
detect the SOLO which is free and will connect.
• You should be aware that never a connection between a specific
SOLO and PC is saved, Connections are made automatically when
V
FConnect3.exe or VFConnect3-Xplane
starts and it find a SOLO
which is available (free of connection to a PC )
• If you want to prevent a panel to connect to another PC, or make sure
that a SOLO will connect to the same PC, connect them directly without
going by the LAN network.
8. MULTIPLE SOLO AIRLINER
OR MULTIPLE MFS / P3D/
X-PLANE COMPUTER IN
THE SAME NETWORK