13
6. RADIOSTACK PANEL - USER’S MANUAL SOLO GA
All the buttons of this Radisotack are tactile, so you have to push on the
screen to activate them, just the numerical values have to be changed
with the real rotary knobs located at right side.
Some options may differ a bit depending on the simulation software you
are using (MFS/P3D or X-Plane), these differences are detailed in the
following instructions.
Definition of rotary knobs
ALT SEL (MFS/P3D):
Rotate to change the ALTITUDE in increments of "100 feet" or rotate
keeping the knob pressed to change the ALTITUDE in increments of
"1000 feet"
COM frequencies:
Rotate to change the decimal of the frequency in increments of "0.025"
or rotate keeping the knob pressed to change the integers in incre-
ments of "1.00".
NAV frequencies:
Rotate to change the decimal of the frequency in increments of "0.05" or
rotate keeping the knob pressed to change the integers in increments
of "1.00".
ADF frequency:
Rotate to change the frequency in increments of "000.1" or rotate kee-
ping the knob pressed to change the frequency in increments of "010.0".
XPDR Tansponder:
Rotate in order to switch the selector to the different positions: OFF, SBY,
TST, ON, ALT
6. RADIOSTACK PANEL
Audio panel
& Markers
Autopilot
Distance
Measurement
Eq. (DME 1&2)
Automatic
Direction
Finder (ADF)
Transponder
(XPDR)
Communication
& Navigation 1
Communication
& Navigation 2