21
8. TROUBLESHOOTING - USER’S MANUAL SOLO GA
connecting SOLO directly to your router instead of connect to the pc.
This way, connection will be established through the network LAN.
2. If you have connected SOLO directly to your PC and your PC has
the other network sockets free, try connecting SOLO to the PC using
another network card.
POSSIBLE CAUSE 8:
Network problems.
SOLUTION:
If you have connected your PC and SOLO directly (without
router), at the beginning you will have to wait some time, even more than
a minute, because Windows set IP addresses automatically.
If after a few minutes’ connection is not established, try the next:
Make sure that IP configuration is in DHCP, for that:
1. Press W R key and on the window that will appear, write “ncpa.
cpl” and press enter.
2. A window will appear with the various network connections. If you have
more than one, press over which is active (icon has color), by the right
button of the mouse → “properties”. A window like this will appear:
3. Search on the list “Internet protocol version 4 (TCP/IPv4)”, select it and
press on “properties”. A window like this will appear.
