background image

3

Warranty registration must be completed online.

To activate warranty visit: 

aircleansystems.com/warranty

AirClean

®

 Systems is committed to providing our customers with quality equipment and service 

after the sale. We request that you take a moment to fill out the warranty registration form at 
aircleansystems.com/warranty so that we may ensure prompt and efficient service in the future. 

AirClean

®

 Systems provides a warranty on all parts and factory workmanship. The warranty includes 

areas of defective material and workmanship, provided such defect results from normal and proper 
use of the equipment. 

The warranty for all AirClean

®

 Systems products will expire one year from date of shipment from

AirClean

®

 Systems, except for DrySafe™  and CyanoSafe™ product lines, which carry a two-year 

warranty from date of shipment.

This limited warranty covers parts and labor, but not transportation and insurance charges. In the 
event of a warranty claim, contact AirClean

®

 Systems or the dealer who sold you the product. If 

the cause is determined to be a manufacturing fault, the dealer or AirClean

®

 Systems will repair or 

replace all defective parts to restore the unit to operation. Under no circumstances shall AirClean

®

 

Systems be liable for indirect, consequential, or special damages of any kind. This statement may be 
altered by a specific published amendment. No individual has authorization to alter the provisions of 
this warranty policy or its amendments. Lamps and filters are not covered by this warranty. Damage 
due to accidental breakage is also not covered.

 

NOTE: Do not return any materials without authorization from AirClean

®

 Systems.

 

Products returned without prior authorization will not be accepted. AirClean

®

 Systems

 

and its dealers are not responsible for shipping damage. The recipient must file

 

claims directly with the freight carrier. If authorization has been received to return this

 

product, by accepting this approval, the user assumes all responsibility and liability

 

for biological and chemical decontamination and cleansing. AirClean

®

 Systems reserves

 

the right to refuse delivery of any products which do not appear to have been properly

 

cleaned and/or decontaminated prior to return. Please see additional Shipping Claims

 

on Page 20.

IMPORTANT:

 Complete the warranty registration form at aircleansystems.com/warranty 

WARRANTY

Summary of Contents for AC600 Series





















Reviews: