1. Open the valve cover of the air mattress to let the air
out.
2. Fold the air mattress in half to help accelerate
deflation.
3. Once most of the air has deflated from the bed, locate
the nozzle caps and choose the appropriate cap to
attach to the opening of the pump.
4. Insert the pump into the valve until snug.
5. Press the power switch on the side of the pump to
deflate the rest of the air inside the bed.
6. Once all the air has been removed from the bed, turn
off the pump and quickly close the valve.
7. Fold the bed and store safely.
ASSEMBLY INSTRUCTIONS
1.
Check your surroundings for any sharp objects on the
ground/floor that may cause damage to the bed (nails,
screws, sharp
rocks, etc.)
2.
Unfold the bed and lay it flat on the floor.
3.
Locate the nozzle caps and choose the appropriate cap
to
inflate the air bed.
4.
Attach to the INFLATE opening of the battery pump.
5.
Open the valve cover and insert the battery pump until
snug.
6.
Press the power switch on the side of the pump and
inflate.
7.
Once it is firm, turn off the pump and quickly close the
valve to
avoid losing any air.
DO NOT OVERINFLATE. INFLATE UNTIL THE WRINKLES ARE
ALMOST GONE, AND THE MATTRESS IS FIRM.
DEFLATING:
SETTING UP / STORING AWAY
INFLATING:
4
MODEL#
6
3
0
1
TRB
Youtube Assembly Video:
https://www.youtube.com/watch?v=an3hQIXfKHs
