Manual V1.00_2009_V5
8.2 Manual Start flight recording
The flight recording may also be initiated manually from the Switch-On menu,
8.2.1 Manual Start
The flight recording may also be initiated before the
instrument has acquired a position fix
START flight recording:
Click Key2
to go to the flying screens
The actual recording will however only commence once the
instrument has acquired a position fix
8.2.2 Setting the altitude manually
If the launch altitude is known it may be entered manually in
MENU / ALTI SET
Use Key1
to decrease, Key2
to increase
and Key3
to confirm
QNH display:
For the QNH display (in hPa) to be correct the current
instrument altitude must be calibrated before the flight. Note
that QNH is only relevant below app. 200m and will only be
displayed up to this altitude. As the barometric sensor ages,
different instruments may show different altitudes – the
accuracy of the altitude measuring is not affected by this.
Page
19
Summary of Contents for XC-trainer Series
Page 1: ...Manual V1 00_2009_V5 Page 1...
