14SEER AIR COOLING ONLY SYSTEM TECHNICAL MANUAL
29
②
.
Special vacuum dry procedure
⚫
This vacuum dry method is used in the following conditions:
⚫
There’s moisture when flushing the refrigerant pipe.
⚫
Rainwater may enter into the pipe.
⚫
Vacuum dry for the first time ······ 2h pumping
③
. Vacuum destroy for the second time ······ Fill nitrogen to 0.5Kgf/cm
2
Because nitrogen is for drying gas, it has vacuum drying effect during vacuum destroy. But if the moisture is
too much, this method cannot dry thoroughly. So, please pay more attention to prevent water entering and
forming condensation water.
④
. Vacuum dry for the second time······1h pumping
Determinant: Pass if achieving below -755mmHg. If -755mmHg cannot be achieved in 2h, repeat procedure
③
and
④
.
⑤
. Vacuum placing test ······ 1h
⑥
. Sketch map of special vacuum dry procedure
Summary of Contents for ACTC1814NG1-D
Page 4: ...14SEER AIR COOLING ONLY SYSTEM TECHNICAL MANUAL 2 Nomenclature...
Page 15: ...14SEER AIR COOLING ONLY SYSTEM TECHNICAL MANUAL 13 60K...
Page 23: ...14SEER AIR COOLING ONLY SYSTEM TECHNICAL MANUAL 21...
Page 42: ...14SEER AIR COOLING ONLY SYSTEM TECHNICAL MANUAL 40 3 9 High exhaust temperature protection...