In case the vehicle counts with
proximity sensors relocate them following
the instructions, otherwise continue with
the rest of the manual.
UNINSTALL SENSOR
IF THE VEHICLE HAS SENSORS FOLLOW STEPS 2 - 7
IF IT DOES NOT HAVE SENSORS GO TO STEP 8 .
DRL ELECTRICAL INSTALLATION DIAGRAM
HEAD LIGHTS
RED
ORANGE
GREEN
GREEN
+ YELLOW
CONTROL
BOX
BLACK
FUSE
FUSE BOX
- ORANGE: CABLE CONNECTED TO IGNITION
(+) PO) FEED ON FUSE BOX OR WIRE
- BLACK: BATTERY NEGATIVE(-)
- RED: BATTERY PO)
- GREEN: HEAD LIGHTS (+)
LOCATE FUSE SLOT WITH
(+) POSITIVE FEED WHEN
IGNITION IS ON.
TAP A CIRCUIT
FUSE
FUSE TAP
FEMALE
CONNECTOR
ORANGE
CABLE
APPLY PRESSURE
TO FEMALE
CONNECTOR
4
To connect green wire remove
right mud guard to access the
head light harness.
To reinstall mud guard use 4
push pins included.
HEAD LIGHT
DRIVER´S SIDE
PLUG
YELLOW
GREEN
CONTROL
BOX
If the DRL’s did not
turn on inmediatly
when the ignition is
on, please wait for a
few minutes until the
computer resets and
then the lights will
light up.
DATE: 26.05.2017
PG.
INSTALLATION MANUAL
2
GM - SILVERADO 2014 +
México 01 800 623 79 52 / USA 844 280 2775
