10
3.1 Unfolding The Arms
Airdog ADII arms are designed to fold in. This makes it safer to travel with and it
makes it easy to store in a small case or a backpack.
To unfold the arms:
1) Push the arm away from the
drones body.
2) Arm is fully unfolded when a snap
is heard and it's locked in place.
To fold the arms back together:
1) Slowly pull the arm back toward
the drones body.
• Be careful while folding the arms as there is a risk of pinching your fingers.
• Make sure that all drones arms are fully unfolded and locked in place before
each flight.
• Make sure that the drones arms are in good condition before each flight.
• Flying with damaged (cracked) arms may cause a crash that is not covered by
the warranty.
• Do not try to unfold or fold the arms while the propellers are rotating.
3.2 Unfolding The Landing Gear
Unfold the front landing gear:
1) Press on the snap-fit to release the “Y” part from the folded position.
2) Lift the "Y" part up to approximately 45º.
3) Lift the small support piece and hook it into the “Y” part.
