20
REAR ARM PLACEMENT
To ensure a smooth and safe flight you
must maintain the correct positioning of
the rear motor. This will keep the drone
from rotating on its own while hovering.
For optimal flight rear tail motor should
be slanted to the right at approximately
10 degrees when viewing from backside
of drone.
To restore correct alignment back to factory settings first have the drone
powered and operational by following steps 1 through 9 of the preflight
section. Before use firmly hold the rear arm while using free hand to adjust
motor to correct position. There will be resistance.
WARNING: Do not handle drone while drone while it is armed.
FLIGHT TIP: Correct placement of the
camera will ensure a smoother video,
flight quality and battery life of the
Pocket Drone.
CAMERA ATTACHMENT
The Pocket Drone has a camera mounting plate located directly in front of
the battery box for your action camera. This area was designed to reduce
vibration of the camera and ensure proper balance during flight.
1.
Make sure the battery box
is locked in place.
3.
Ensure edge is flush with
the battery box.
2.
Align the flat adhesive mount
centered directly on mounting plate.
4.
Attach the flat adhesive mount to
the bottom of the drone.
