Install the transmitter wall bracket
in wall by two screws and hang
transmitter in it carefully.
Note:
This remote control has memory function setting. The fan will operate at the same
speed and the fan light will stay at the same brightness as the last time the power
supply was turned off.
Install the battery (9V, not included) to the transmitter.
* Press "HI" to turn on the fan at high speed.
* Press "MED" button to turn the fan in medium speed.
* Press "LOW" button to turn the fan in low speed.
* Press "FAN/OFF" button to turn off the fan.
* Press and release the "LIGHT ON/OFF DIMMER"
button quickly to turn on or off the light.
* Press and hold the "LIGHT ON/OFF DIMMER"
button to
dim or brighten lights to the desired level
and release, and the brightness level will be
memorized. Turn on the light again, then fan light
will restore on of the brightness level which was
dimmed last time.
Wall Bracket
Transmitter
Screw
FAN/OFF
LIGHT
ON/OFF
DIMMER
HI
LOW
MED
F A N / O F F
LIGHT
ON/OFF
DIMMER
H I
M E D
L O W
Fig.20
Fig.21
PAGE: 8 / 9
F A N C O
140819
