Note: Please do not relamp the bulbs alone because of the heavy glass kit.
How to replace the upper light bulbs
Hold the housing glass shade upward
carefully. (NOTE: If the light bulb and
glass kit are hot, please remove them
after shutting off power for 30 minutes)
Take the old bulb from the socket and
reinstall a new one.
Slide the downrod stand cover upward
along the downrod. Unscrew three set
screws which fasten the collar and the
glass holder by using screwdriver.
Turn off the electric power at the
main fuse or circuit breaker box.
Downrod Stand
Cover
Downrod
Screwdriver
Set Screw
Glass Holder
Housing Glass
Shade
Housing Glass
Shade
Bulb
Adjust the housing glass shade to make
the reverse switch locate in the big notch
of the glass holder. Secure the glass
holder to the collar using the set screw.
Fig.5
Fig.1
Fig.4
Fig.7
Fig.3
Fig.2
Collar
Screwdriver
Set Screw
Glass Holder
Housing Glass Shade
Place the housing glass shade back
to the fan fixture set carefully.
Carefully slide the downrod stand cover
back to cover the housing glass shade.
Housing
Glass
Shade
Fan Fixture
Set
PAGE: 5 / 5
Turn on the electric power at the
main fuse or circuit breaker box.
Housing Glass
Shade
Downrod
Downrod Stand
Cover
Collar
Fig.6
F A N C O
F A N C O
090622
