4
7.
Remove the plate at light kit
housing that covers the
fan-shaped hole.
8-1.
Insert the blade into fan
blade hole.
8-2.
Fasten blade onto motor
assembly through fan-shaped
hole using the washer & motor
screws provided from hardware
bag.
8-3.
Adjust the light kit to the
right position for blade
assembly, repeat the above
step(8-2) until 4 blades
assembled well.
9.
Re-attach the plate in place
after blade installation is
completed.
10.
Install two proper lamps to the sockets (E27,
B Type, max. 40W, not included).
11.
Install the glass shade onto the fan light housing by
carefully rotating the lampshade clockwise.
