80001028
– Issue 1 10/21
4
1.2 Warranty Claims
Any warranty, guarantee or offer provided by Airflow Developments shall not apply if the
instructions are not observed. The use of accessories, add-ons or other interactions which
are not recommended or offered by Airflow developments is not permitted. Any damage or
issues that may occur from misuse, unauthorized tampering or modification with the unit is
not liable for warranty
. “Unit” shall refer to all items in the scope of this delivery. Upon
successful delivery the unit is considered correct. If modification, tampering or adjustment
has been done without the express instruction of Airflow Developments staff or authorized
technicians, your warranty and guarantee is considered breached if issues arise from this.
1.3 Regulation Guidelines
If the product is installed correctly and used to its intended purpose, it conforms to all
applicable regulations and directives at its date of manufacture as per its declaration of
conformity document. Upon delivery it is recommended that a manager or user check the
unit for breaches of relevant safety legislation that occurred in transit and then raise any
issues with the transport company if issues are found.
1.4 Intended Use
Purigo M 650 and M 850 are designed to be used in a typical residential/commercial
environment. It is for indoor use only and works with 230V AC supply from a normal utility
socket. It can be used for filtering indoor air by means of recirculating it and removing the
small particles, dust, pollen, bacteria, and viruses with the help of air filters. Any use other
than the intended use is prohibited!
Do not use the unit at a relatively humidity higher than 70%.
Do not use the unit at temperatures below 5°C and above 40°C.
Do not operate the unit with different utility/mains power then listed on this manual.
1.5 Receipt
The delivery contains the air purifier unit. The scope of delivery also includes the items
below as the assembly kit:
•
Power supply cable, 1 piece
•
The materials above are attached to the service panel of the unit with adhesive tape.
Please check delivery immediately on receipt for accuracy and damage. If damaged, please
notify the carrier immediately. In case of delayed notification, any possible claim may be
void.
1.6 Storage
When storing for a prolonged time, the following steps are to be taken to avoid damaging
influences: Protection by dry, air-dustproof packing (plastic bags with drying agent and
moisture indicators). The storage place must be waterproof, vibration-free, and free of
temperature variations (ambient temperature limit min/max 0°C/ +40°C). Damages due to
improper transportation, storage or commissioning must be verified and are not liable for
warranty.