80001028
– Issue 1 10/21
8
4.0 Installation
Section 4 contains information about the installation of the product into its intended area of
operation. It contains information about the installation location, mobility, electrical
connection, and unboxing.
4.1 Unboxing
The product will come in a cardboard box which can be disposed of and recycled.
Ensure
this manual is kept with the unit.
The unit will not come upright, and it is not
recommended the product is unboxed this way in case it may fall. Move the box to the
intended location of install using a suitable means. If the unit is too heavy, use 2 people or
suitable machinery such as a pallet mover. If for any reason, the box is damaged and
preventing transport, consult section 1.2 and 1.5 of this document. In this case, the product
may be removed from the box, upright it and wheel it to the desired location using the mobile
wheels at the bottom of the unit.
4.2 Installation Location
The Purigo M 650/850 air purifiers must be placed in a vertical position in such a way that
the air inlets and air outlets of the apparatus are not blocked by obstacles and a clear air
distribution path is guaranteed. The unit is intended to be stood on its wheels. Do not seal
the unit in place as the back will need to be accessed for maintenance. Do not put the unit in
a location which will exceed its maximum temperature tolerances. Do not place the unit in
areas which are to be kept clear for any reason, such as a fire exit. Allow easy access for
adjustment of the potentiometer. Do not place the unit inside a cupboard, wardrobe, or
cabinet. Do not rest heavy objects on the unit or use it to hold other objects in place. It is
recommended to not place the unit where there is a danger of it falling from a great height.
Do not place the unit in water or submerge it. Do not concrete the unit in place or install into
a wall, floor or ceiling.
4.3 Mobility
The Purigo M series has wheels at the base of the unit which allow free movement. These
wheels can be locked by pressing down on the handles on the top of the wheels. When the
unit is to be moved, unlock these wheels again. Do not attempt to move the unit when the
wheels are locked.
4.4 Electrical Connection
The electrical connection is made by plugging in the power cable to the back of the unit and
inserting the plug into a mains power socket. The black power switch on the back of the unit
will turn power on and off. Do not run the electrical connection through water using a cable
extender or any other cable. Ensure the plug and plug socket is safe and electrically secure
BEFORE
operation or plugging in the unit. Never attempt to force the wrong plug type into
the power connection. Always check the plug is compatible with the product before
attempting to install.
