80001028
– Issue 1 10/21
10
4.0 Installation
Section 4 contains information about the installation of the product into its intended area of
operation. It contains information about the installation location, mobility, electrical
connection, and unboxing.
4.1 Unboxing
The product will come in a wooden structure and packaged which can be disposed of and
recycled.
Ensure this manual is kept with the unit.
The unit will not come upright, and it is
not recommended the product is unboxed this way in case it may fall. Move the box to the
intended location of install using a suitable means using a forklift, crane, or pallet truck. If for
any reason, the box is damaged and preventing transport, consult section 1.2, 1.5 and 1.7 of
this document.
4.2 Installation Location
The Purigo T air purifiers must be placed in a vertical position in such a way that the air
inlets and air outlets of the apparatus are not blocked by obstacles and a clear air
distribution path is guaranteed. The unit is intended to be stood on its feet. Do not seal the
unit in place. Do not put the unit in a location which will exceed its maximum temperature
tolerances. Do not place the unit in areas which are to be kept clear for any reason, such as
a fire exit. Allow easy access for adjustment of the potentiometer. Do not place the unit
inside a cupboard, wardrobe, or cabinet. Do not rest heavy objects on the unit or use it to
hold other objects in place. It is recommended to not place the unit where there is a danger
of it falling from a great height. Do not place the unit in water or submerge it. Do not concrete
the unit in place or install into a wall, floor, or ceiling.
Warning:
Due to load the package must be transported by forklift, pallet
truck or crane. Ensure symmetrical load distribution and lift the device
slowly. Always keep a close monitor on the package and do not stand
underneath it. Do not attempt to operate this machinery and move the unit
unless properly licensed.
Warning:
Risk of personal injury and equipment damage due to falling
from the forklift! Before transporting the unit, please ensure the forks of the
forklift truck are long enough to lift more than the entire underside of the
unit! (See figure 2) refer to table 1. Section 1. Risk of personal injury and
equipment damage due to an unpredictable center of gravity. If the package
is fitted incorrectly, incorrect weight distribution means they can be
dropped easily. Falling or overturned packages can cause damage or injury!
Figure 2: Make sure the length of the forks is sufficient to reach the end of the package
